Penetrates deep into concrete pores, binding sand and cement particles to form a tough, flexible, yet breathable film. It’s excellent for binding chalky surfaces (to improve paint adhesion) on either painted or unpainted substrates.

Seal-Krete Original also strengthens mortar joints, reduces efflorescence on brick and acts as a colour rejuvenator on older painted or coloured surfaces such as aged pvc weatherboards and colorsteel.

Seal-Krete Original is formulated to protect vertical surfaces such as concrete block, stucco, plaster, gib board, galvanized metal, colorsteel, pvc weatherboards and stone. It’s also an excellent clear bonding primer for paints, stains, and texture coatings applied to horizontal surfaces.

• Water based
• Interior/Exterior
• Goes on milky white, dries clear

Coats: 2 • Drying Time: 2-4 Hours, 25°C/50%RH • Coverage: 2-8 m²/L

Click here for more on Original Waterproofing Sealer

A clear water-based sealer formulated to provide “invisible” protection to bare concrete. It’s ideal for driveways, sidewalks, patios, concrete pavers – wherever you want to seal concrete without adding colour or sheen. This unique, one coat formula penetrates and bonds with concrete to add strength and protect against rain, salt and freeze/thaw damage. It’s easy to apply by spray or roller.

• Water based
• Exterior
• Invisible

Coats: 1 • Dry to foot traffic 24 hours, vehicle traffic 72 hours • Coverage: 2-8 m²/L

Click here for more on Driveway Protector

Designed to provide long-lasting protection and easy maintenance for garage floors, shop floors, paving and similar bare concrete or masonry surfaces. Excellent for dustproofing, it protects against damage from moisture penetration and road salts.

• Resists oil stains
• Excellent hot tyre mark release
• Water based
• Interior/Exterior
• Goes on milky white, dries clear satin

Coats: 1 or 2 • Recoatable 2 hours, Dry to foot traffic 24 hours • Coverage: 4-8 m²/L

Click here for more on Concrete / Garage Floor Sealer

Provides long lasting surface protection and easy maintenance to a wide range of masonry and concrete surfaces. It protects against moisture damage while enhancing the natural colour of brick, slate, stone and similar surfaces. The acrylic formulation is environmentally friendly, very low odour and easy to use. The non yellowing formula dries to a clear semi gloss finish. Seals and protects exposed aggregate, slate, brick, stone, concrete, precast pavers and more.

• Enriches natural colour
• Water based
• Interior/Exterior
• Goes on milky white, dries clear semi gloss

Coats: 1 or 2 • Recoatable 2 hours, Dry to foot traffic 24 hours • Coverage: 4-8 m²/L

Click here for more on Wet-Look Sealer

A clear, urethane fortified acrylic sealer developed to provide a high-gloss, premium finish to painted, stained or even bare concrete. It’s durable, hard wearing, scratch resistant, stain resistant, oil and petrol resistant, and it extends paint life. Showroom Finish also protects against moisture damage and enhances the natural colour of brick, slate, stone, exposed aggregate, clay and concrete pavers.

• Urethane fortified
• Water based
• Interior/Exterior
• Goes on milky white, dries clear high gloss

Coats: 1 or 2 • Recoatable 2 hours, Dry to foot traffic 24 hours • Coverage: 3-12 m² / L

Click here for more on Showroom Finish

A ready-to-use, one-part, acrylic-epoxy floor paint and is formulated to resist hot tyre pickup, chemicals, oil, grease and petrol stains. This epoxy fortified formula dries to a durable, UV resistant, satin finish that resists scuffing, peeling, blistering and fading. Epoxy-Seal is easy to maintain, making it ideal for both interior and exterior high traffic areas. Ideal for concrete garage floors, driveways, shop floors, basements, pool decks, walkways, patios and porches.

• Outstanding chemical resistance
• Water based
• Interior/Exterior
• Available in sand, armor gray and slate gray satin finish

Coats: 2 • Recoatable 6 hours, Dry to foot traffic 24 hours • Coverage: 7-12 m²/L

Click here for more on Epoxy-Seal

A ready to use, low odour formula for concrete, masonry and brick. Suitable for above and below grade use. Damplock waterproofing paint withstands over 20psi of hydrostatic pressure. It is ideal for use on concrete blocks, retaining walls, bird baths, pre-cast fixtures, basements and foundations.

• Colour bright white. Can be over coated with acrylic paint
• Water based
• Interior/Exterior

Coats: 2 • Recoatable 2-3 hours, can be overcoated after 24 hours • Coverage: 2-3 m²/L

Click here for more on Damplock